Thermocouple for Gas Oven Manufacturers

Thermocouple for Gas Oven can be used in many applications. Both for commercial and residential devices. Commercial uses of Gas Solenoid Valves generally include any pneumatic machinery that uses gas pressure to move its parts. Manufacturing facilities might use solenoid valves to control the movement of gases used in their manufacturing processes.

Residential applications include solenoid valves used inside furnaces.Thermocouple for Gas Oven control when the gas comes on and is ignited by the pilot light to create warmth. Vehicles powered by natural gas use solenoid valves to control the flow of gas into the engine’s cylinders. While gas-powered clothes dryers also have solenoid valves to control the flow of gas into the dryer, which helps to prevent fires or gas poisoning.

provides the broadest line of Thermocouple for Gas Oven designed to control the flow of fuel gas, liquid propane and all grades of fuel oil used in combustion applications such as: industrial furnaces, ovens, kilns, incinerators, burners and boilers. Solenoid operated valves handling combustion system pilot and main line fuel shutoff and control needs. These valves are available in 2-way normally closed, normally open, manual reset, and 3-way diversion.

Thermocouple for Gas Oven are available in brass, aluminium, and stainless steel. Their main features include junction box; pipe taps; visual indication; proof of closure; leading agency approvals; and pipe connections from 1/8” to 3”. Most valves are rated for -40ºF service for outdoor installation in frigid climates.

Bürkert’s range of Thermocouple for Gas Oven are available in an extensive range of body and seal materials. From PTFE, to NBR, EPDM and even PEEK, this tutorial article on solenoid valve materials by Solenoid Valve expert Michael Hannig will tell you all you need to know.
1, the thermoelectric potential
Heating characteristics: Thermocouple for Gas Oven on the flame temperature is 600-700 ° C, the thermoelectric potential shall be the 15 mv or greater
Cool feature: the thermocouple on the flame temperature is 600-700 ° C, heating to cut off the air after 5 min, when the thermoelectric potential shall be the.
Jobs temperature: the temperature is not higher than 700 ° C, the rest is not higher than 125 ° C.
2, internal resistance range depends on the type and length, are indicated in the corresponding drawings, the tolerance within 10% of the specified value.
3, mechanical properties
Wire winding or do bending radius less than 10 mm, should be avoided in the operation of the assembly and folding as well as friction with instruments and devices sharp edges part, Thermocouple for Gas Oven should avoid the small Angle bending around the welding position.
Welding position can bear at least 150 n pulling force.
Product size can customize according to customer's requirements.
Thermocouple for Gas Oven parts must be heated in the heating thermocouple tip 3-5 mm, not to be very tip position flame internal, will cause potential and reduce life.
Thermocouple for Gas Oven fixed behind and the positive and negative wire parts, as far as possible to maintain good heat dissipation, reduce installation plate and thermocouple sheath of heat accumulation, favourable time of closing valve.
Q:Can you provide Thermocouple for Gas Oven ?
A:Of course,we can offer you samples for free(less than three),and you just pay freight.

Q:What about your delivery time?
A:Within 25 days after received your Thermocouple for Gas Oven deposit.

Q:Can you tell me Thermocouple for Gas Oven payment term?
A:Always 30%TT and balance with BL copy.also we can accept LC\DP\DA.

Q:Will you give Thermocouple for Gas Oven any discounts when we place a bigger order?
A:Of course,but the discount depends on the quality.